Appendix H: Pharmaceutical (Two-channel) Output Mode
Page H-2
Lasair II Particle Counter Operations Manual
3
Enable the edit mode and place a check mark in the
Enable TCP/IP
check box.
4
Click on the
Screen Select
icon softkey
until the
Comm Setup-Data
dialog
box opens.
To allow only 2-channel data to be output to Pharmaceutical Net:
1
Press the
Enter
key to enable the Edit mode. The 0.5
μ
m & 5.0
μ
m check box
will be highlighted.
2
Press the
Enter
key again to place a check mark in the check box.
3
Advance to the
0.5
μ
m
& 5.0
μ
m
TCP/IP
check box and place a check mark in it.
Figure H-1: Comm Setup, Network Dialog Box
Figure H-2: Comm Setup, Data Dialog Box
