Page 6-6
Lasair II Particle Counter Operations Manual
Chapter 6: Operation
Controlling how the Data is Displayed
You can manipulate the displayed data in the following two ways:
•
You can determine how the data are displayed by controlling the
Data Display
Screen
.
•
You can determine which data are displayed by controlling the Data Filter
Screen.on the
Data Table Screen
.
To control how the data are displayed:
1
From the
Main Display Screen
, press the
Icon softkey, and then press
the
icon softkey on the next screen
2
Open the
Data Display Setup Screen
by pressing the
Data Display
icon
softkey.
The
Data Display Setup Screen
will open.
The options in the
Data Display Setup Screen
allow you to choose the units of data
displayed, the kind of data displayed, how the data is sorted, and the order of the
data (ascending or descending.)
The following information describes the
Data Display Setup Screen
options
in the order that they would be activated when pressing the
Tab Forward
softkey.
Units: [ft.
3
or m
3
]
Select cubic feet or cubic meters. The default is read from the instrument’s
Sampling Setup Screen
when the particle counter is turned on.
Figure 6-3: Data Table Display Setup Screen
