`
Pic. 3 Wiring diagram
Pic. 4 Connection to the access controller (reader mode)
3. Master setting by IR remote control
Note that all the following settings should be done under Master programming mode.
If master PIN is wrong and time is over 5 seconds after PIN entering, the device will return to standby
mode. After the correct entering of master PIN, it will also return to standby mode after 30 seconds if
there is not any operation. Press “#” to confirm the inputted number, press “*” for return to the previous
menu, the light indicator will indicate the operation mode.
To enter the programming mode
Red
Red flash
Functions
Description
*
6-8 digit Master PIN
To enter the programming
mode
Default 888888
