Optional Modules
Using the MSR Module
A. MSR Module Installation
B. Testing the MSR Module
Using the Barcode Scanner
Module
Using the RFID Module
Launch the test application. Then place the RFID card
on the upper-right corner of the Tablet PC to scan the
card.
Data on the card is read and displayed on the screen.
Using the IC Card Reader
Launch the test application. Then open the IC card reader
cover and insert a smart card into the slot.
Once the device successfully reads the data on the smart card
and the read data appears on the screen.
www.partner.com.tw
© 2013 Partner Tech Corp. All Rights Reserved
1. Remove the screw securing the
module connectors slot cover.
2. Align the guides on the MSR module
through the guides on the side of the
Tablet PC.
3. Attach three screws to secure the
MSR module to the Tablet PC.
Launch the test application. Then swipe a
magnetic stripe card through the MSR module.
Data appears on
the screen if the test
is successful.
Launch the test application.
Then aim the scanner on the barcode
and press the scanner trigger button.
Data appears on the screen if
the test is successful.
