once again to break.
SHIFT make key is represented by "S^".
SHIFT break key is represented by "S^break".
CTRL make key is represented by "C^".
CTRL break key is represented by "C^break".
ALT make key is represented by "A^".
ALT break key is represented by "A^break".
Left ALT and right ALT is classified, but their
representation are the same.
Move the highlight to edit the next key and continue with
steps 1, 2, 3, until you are done. Then press ESC to
quit this edit mode.
Null Key define ALT-N
Assign a key with Null function.
When a key is defined as a Null key , it is disabled.
1. Input the key position number.
To define the LAYER KEY to be Null key, input 0.
To define the KEY LOCK to be Null, input l1 - l6.
2. Continue pressing key position numbers until you
are done. Then press ESC to quit this edit mode.
Default Key ALT-D
Select/Cancel default key table.
If select, the upper 28 keys of the programmable keyboard
is forced to be default keys.
If cancel, the upper 28 keys of the programmable keyboard
is returned to their settings.
2.6
Layer SubMenu Commands, and description:
-------------------------------------------------------
Change Layer
Change to another layer to edit.
Layer Key Code
Define the layer key to be single key or combination keys.
As function redefine.
Layer Key Null
Define the layer key to be a Null key.
Layer Key Position
Define the position of the LAYER KEY.
There should be only one LAYER KEY in the keyboard.
After you have defined a new LAYER KEY position, the previous
key is changed to NULL key setting.
Layer 1
Enable/disable layer 1.
Layer 2
Enable/disable layer 2.
Layer 3
Enable/disable layer 3.
it is forbidden to disable all the layers.
2.7
Keylock SubMenu Commands, and description:
