Print specifications
Model
Model
The print head
Print mode
Ribbon / thermal
Ribbon specifications
The paper size
The outer coil type
Pulse excitation
(
the size) (width X length)
Print speed (inches per second)
Maximum print width
Maximum print length
Heat sensitive piece (wear)
Ribbon diameter
The ribbon length
The ribbon axis size
The ribbon width
Ribbon winding form
Label length
The paper height gap spacing
Roll axis size
The thickness of the paper
(tag + bottom paper)
The width of the paper
(tag + bottom paper)
The paper winding form
Paper type
The maximum capacity of
internal paper roll diameter
Print out of plane roll / print surface involute
Continuous paper, gap of paper, paper folding, punched paper
Note:If you use the tag length less than 25.4mm (1 "),
recommend the use of a perforated line in the gap on
the label paper so the tear.
50km
LP-1625
LP-1625
1
.
6
1
.
5
1
.
4
Max. 120mm(4.72")
Min. 20mm(0.78")
Max. 0.254mm(10mil)
Min. 0.06mm(2.36mil)
25.4mm~38mm(1"~1.5")
10mm~2286mm(0.39"~90")
2~6inch/s
LP-1625 Manual
Emulation
341625001 with cutter, TSPL emulation
341625002 without cutter, TSPL emulation
341625003 with cutter, ZPL emulation
341625004 without cutter, ZPL emulation
