Party Light & Sound PARTY-10RGB, User Manual

5

EN

INSTALLING THE BATTERIES 

Remove the battery cover from the back of the remote control 

as shown and insert 2x AAA size batteries ensuring correct 

polarity 

RECOMMENDATIONS FOR BATTERIES

This symbol indicates that used batteries should not be disposed of with household waste but deposited in separate 

collection points for recycling.

ATTENTION

! 

Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type.

WARNING

!

 Do not swallow the battery. Danger of chemical burns. Keep new and old batteries out of the reach of children. 

If the battery compartment doesn’t close properly, stop using the product and keep it out of the reach of children.

If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body, contact imme-

diately a doctor. 

CONNECTION OF THE MICROPHONE

Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound output.

KARAOKE FUNCTION

This feature is available with any input. Play a track through AUX/USB/TF/FM/Bluetooth, connect a microphone 

and sing along.

BUILT-IN REC FUNCTION

1. Plug a microphone into the MIC IN input.
2. Insert a USB/TF card into the corresponding port. Press Input selector button and select USB/TF mode.
3.

If the USB/TF card is plugged into the speaker for the first time, the system will automatically create a folder

named ‘record’ to save the recorded files.

4. When you are ready to record, press REC button to record the sound of the wireless or wired microphone.

USB/TF OPERATION

Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could generate 

interference. If the speaker stops working, switch it off and on again, or unplug USB/TF card and re-plug it. The 

speaker should be back to normal status.
The maximum size of USB/TF device that can be connected is 32 GB.
Supported music formats: MP3, WMA 

FM RADIO FUNCTION

1. Turn on the unit and press repeatedly the input selector key on unit and select FM function (the display will

show the frequency).

2. Press the PLAY/PAUSE button on the unit or the key 



 on remote control to activate the auto memory (the

radio starts an automatic search for available radio stations and saves them automatically). The station’s

number stored depends on the radio signal in your area. During the search, press PLAY button on the remote

control to stop searching.

3. Use the 



 and 



 keys to listen to the various radio stations saved in memory.

4. To change to a preset station, use the number keys on the remote control.

For example, to call up the station number 12, first press 1 and then 2.

BLUETOOTH OPERATION

1. Turn on the unit and press the input selector button on unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as «PARTY».
4. Press the 



  to start playing and the buttons 



 and

 

 for the selection of songs.