Bartendro
TM
ShotBot
Step 6
Power Up
Important:
Before plugging the AC
power cord into the wall outlet, insert
the DC plug (see image at right) into the
miniRouter board.
Then plug the AC power cord into an
outlet for Bartendro to begin booting.
When the time comes to turn off
Bartendro, start by unplugging the AC
power cord from the wall first.
-7-
Step 7
Insert Tubing into Bottle
While Bartendro is booting up, you can
load your bottle for dispensing shots.
Insert the long flexible tube into an
opened bottle so that it reaches the
bottom.
You’ll know Bartendro is ready when the
Dispenser’s lights begin to fade in and
out, changing color. It normally takes
about 1 minute after plugging power in
for the system to be ready to use.
If the lights stay a solid color, or don’t
come on at all, see the Troubleshooting
section on page 11.
