© PartyFunLights.com
Changing the remote control battery
1. Using a small screw driver remove
the screw on the back of the remote
control.
2. The battery compartment is
located below the screw. Push
and pull the battery compartment
simultaneously as shown to remove
the battery.
3. Once you have removed the spent
battery replace with a 3V battery,
type CR2025. The positive terminal
must point upwards.
4. Once the new battery has been
replaced and the compartment has
been pushed back inside the remote
control, tighten the screw.
WARNING: Button cell batteries can cause serious injury or death if swallowed. Dispose
safely! Store batteries out of reach of children.
•
Swallowing may lead to serious injury or death in as little as 2 hours due to chemical
burns and potential perforation of the oesophagus.
•
If you suspect your child has swallowed or inserted a button cell battery, contact
your countries emergency department.
•
Examine devices and make sure the battery compartment is correctly secured,
e.g. that the screw or other mechanical fastener is tightened. do not use if
compartment is not secure.
•
Dispose of used batteries immediately and safely. flat batteries can still be
dangerous.
•
Keep batteries out of reach of children.
•
Batteries must be changed by an adult.
