46
Floppy Controller
This option enables or disables the
on-board floppy disk controller
. For example, if an external
floppy disk controller needs to be used, the internal one must be disabled.
Option
Description
Note
Disabled (*)
Disable the on-board floppy disk controller
An external controller can be used
(*) = Default setting
Enabled
Enable the on-board floppy disk controller
•
Note:
The floppy controller use the
same connector used by the parallel port
. In this case
when the floppy controller is enabled, the parallel port is automatically disabled, even if was
already enabled in the Setup. The parallel port can be used again after disabling the floppy
disk controller.
EIDE Port
This option enables or disables the
on-board EIDE hard disk controller
. For example, if an
external hard disk controller needs to be used, the internal one must be disabled.
Option
Description
Note
Disabled
Disable the on-board hard disk
controller
An external controller can be used
Enabled (*)
Enable the on-board hard disk
controller
(*) = Default setting
Video Memory
The
video memory size
can be adjusted according the user necessities: more space is reserved
for video, less space is available for the applicative programs and vice versa.
Option
Description
Note
