3
012-07894A
Laser Sight Accessory
®
➤
CAUTION:
Proper laser beam alignment can
adequately be determined by viewing the laser tar-
get fixture from the front of the launcher barrel,
at a
reasonable angle, away from the path of the laser
beam.
➃
Remove the laser target fixture and continue with your
experiments.
Limited Warranty
PASCO scientific warrants this product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman-
ship. This warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return shipment
will not be covered by the warranty.) Shipping costs for
returning the equipment, after repair, will be paid by
PASCO scientific.
Equipment Return
Should this product have to be returned to PASCO scien-
tific, for whatever reason, notify PASCO scientific by let-
ter or phone BEFORE returning the product. Upon notifi-
cation, the return authorization and shipping instructions
will be promptly issued.
➧
NOTE:
NO EQUIPMENT WILL BE ACCEPTED FOR
RETURN WITHOUT AN AUTHORIZATION.
When returning equipment for repair, the units must be
packed properly. Carriers will not accept responsibility for
damage caused by improper packing. To be certain the
unit will not be damaged in shipment, observe the follow-
ing rules:
➀
The carton must be strong enough for the item
shipped.
➁
Make certain there is at least two inches of packing
material between any point on the apparatus and the
inside walls of the carton.
➂
Make certain that the packing material cannot shift in
the box, or become compressed, thus letting the instru-
ment come in contact with the edge of the box.
