user manual
During installation it is advisable to respect the distances indicated (figure c) and to
remember that maintenance interventions can also take place on the rear side, which
must never be blocked.
:
matchboards, furniture, curtains, paintings, sofas), the
minimum distances illustrated (figure c) must be respected, wooden beams and
finishes, sofas or furniture must be placed outside the radiant area of the hearth or The
installation of the appliance must ensure easy access for cleaning and maintenance of
the same, of the exhaust gas ducts and of the flue.
2.4
Air inlet
The stove, during its operation, draws a quantity of air from the environment in which it
is located, this air must be reintegrated through an air intake outside the room itself.
The appliance is equipped with a socket to be able to take the combustion air directly
from the outside of the building, connect the air inlet of the appliance with the outside of
the building using special pipes, resistant to high temperatures (do not use grids) and
make sure that it is positioned so as not to be accidentally obstructed.If it is not possible
to make the air intake on the rear wall of the stove, an air intake of at least 80 cmq must
be made in the room where the stove is positioned, making sure that it is positioned in
such a way as to allow the correct supply of air to the environment and that it remains
free from obstructions. combustible material or activities with a risk of fire
( dimension of
the air intake can be adapted by dimension of room).
fig
.
c
9
Summary of Contents for Flora
