background image

Very Dirty

CLEANING INTERVAL CHART

Dirty

Moderate

Clean

0

2m

4m

6m

8m

10m

Recommended
Cleaning Interval

 

Every 2-3 Days

  Every Week

••

 Every 2 Weeks

  Every Month

  Every 2 Months

••

••

••

••

••

The maintenance interval for cleaning 
the Paslode Cordless Nailer will vary 
depending upon the number of nails 
driven per week, and the operating con-
ditions under which the tool is used. 
When the Paslode Cordless Nailer is 
used in a dirty environment or at high 
nailing rates for extended periods, 
cleaning should be performed at shorter 
intervals.
Paslode® has developed this chart as a 
guideline to assist you in establishing the 
proper cleaning schedule for the type of 

use the tool is getting. If you find that 
the suggested cleaning interval is allow-
ing the tool to become excessively dirty 
between cleanings, reduce the interval to 
the next shorter frequency. If it is appar-
ent that the Paslode Cordless Tool is not 
in need of cleaning at the scheduled 
time, increase the interval to the next 
longer period.
If you have any questions regarding this 
chart or any of the instructions in this 
cleaning procedure, contact your 
Paslode distributor for assistance.

11

Summary of Contents for IM250A-Li2













Reviews: