PAGE 4
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Lektron Series
®
PROFESSIONAL AUDIO & SOUND
®
LECTERN CABINET ASSEMBLY
READING TABLE AND DESK TOP
ASSEMBLY (Fig. 4)
1) Remove Desk Top Assembly from
Carton.
2) Carefully remove the Black Reading
Table by inserting fingers in the opening
positioned towards the rear of the Desktop
assembly.
3) Push-out the Black Reading Table and
set aside.
4) Unravel the Microphone Cable and feed
the Female Connector end up through the
Mike Cable Opening provided on the top
assembly. Set aside.
CABINET TOP ASSEMBLY (Fig. 4)
1) By holding the Top Assembly above the
Lectern mid section feed Microphone Cable
(Male Connector) through opening provided
on top of Lectern Column and let cable rest
on shelf.
2) Next. Insert the reading light plug into the
light socket provided on top of the lectern
mid -section. Lower the Top Assembly on
top of the mid section and line up the four
mounting holes with the mid section top
mounting nuts.
NOTE: MAKE SURE THAT THE LIGHT
WIRE AND THE MICROPHONE CABLE
CLEAR THE LECTERN CABINET.
3) By using the four 4 X 1 V2" Bolts secure
the top assembly to the mid section.
4) Replace the Black Reading Table. Feed
the Microphone Cable Female connector up
through the opening provided and slide the
Reading Table into Desktop assembly.
CABINET BASE ASSEMBLY (Fig. 4a)
1) Line up mounting holes of Base with
Lectern column and secure with hardware
provided.
2) Tighten all screws securely after assem-
bly.
Reading Light
Socket
Reading Light
Plug
Mike Cable
Opening
Mike Cable
Opening
Lectern Top
Lectern Main
Cabinet
Lectern
Bottom
Fig. 4
Fig. 4a
