α
1
PMB132-V, PMB132/12-V
1. GENERAL DESCRIPTION
PMB132-V
and
PMB132/12-V
remote stations for emergency calls enable live or recorded alert or evacuation messages
to be sent out using a controlled microphone. The LEDs on the front panel provide the main information on the status
of the emergency system and on any failures.
These remote stations, designed specifically for the
PA8506-V
system, are of two different types: the
PMB132-V
station
enables a single All-Call to be made; if the alarm messages have to be sent to separate zones, on the other hand, it will
be necessary to use the
PMB132/12-V
station, which enables a maximum of
12 zones
to be selected.
1.1 Numbered references
1. Socket for stem or hand-held microphone.
2. Status-indicator LEDs.
3. Emergency key.
4. Key for interrupting message/failure buzzer.
5. Key for sending out pre-recorded alert message.
6. Key for sending out pre-recorded evac messages.
7. Call key.
8. Key for calling up pre-set messages.
9. Connector for external 24 VDC power supply.
10. IN/OUT connectors.
11. Buzzer switch (see note on page 22).
12. Zone-selection keys with status-indicator LED
(PMB132/12-V only).
Each station must be completed with an additional
microphone (not included in the supply) to be
chosen from among the following models:
MC132-V
Dynamic gooseneck microphone
M132-V
Dynamic hand-held microphone with P.T.T. key
