background image

ANNEX B  Trouble Shooting 

 

 

Master card registration in the lock 

was failed. 

1) Master card registration should be followed 

after deleting old master card in the lock by 

Owner card. 

2) Put Master card on the lock before waiting 

time is out after Owner card. 

Cannot open the lock with Master 

card 

Master card is not registered in the lock. 

Please Register the Master card in the lock. 

Cannot open or close the lock by 

User card   

1. Check the Setting of User card by LOS. 

(1) Free Selection Mode 

  Validity / Operation mode / Lock ID / 

Number of locks this user card can 

be used. 

(2) Fixed Selection Mode 

  Validity /Operation Mode / Lock ID / 

Number of locks this user card can 

be used. 

2. Reset the time of the Lock with Time/Master 

card change card. 

3. Old User card may be still in the memory of 

the lock. Erase the card information from 

the lock by Clear card, then register again 

the Owner card and Master Card, then use 

User card. 

When “Touch” button is pressed, five 

beep sounds with Red lamp. 

Low battery sign. Please replace the batteries. 

Latch does not move, while Card and 

lock operates successfully. 

Too  many goods may  press the lock body. 

Push the locker door to make the space for 

moving of the latch. 

 

 

 

 

 

Version 1.2                  

- 11 -                                         2010-10-06

 

Summary of Contents for HP100














Reviews: