3.2.2 Replacing old Master cards with New Master cards
There are two ways to
delete the lost Master card and register new Master card in
the lock.
(1) Using Time/Master Change Card
①
Read the master cards (all Master cards to be used in a lock) to
register in each lock at Time/master change menu in LOS program
(or LIS program).
②
Put the Time/Master change card to the reader, and download the
master card chip numbers to the Card.
③
Put the Time/Master change card to the locks, then, new Master
cards will be registered to the lock, and lost master card will be
blocked.
(2) Using Owner Card
①
Delete the old master card registrations in the lock (refer to the 3.1)
with Owner Card.
②
Put new master cards to each lock so as to register new master
cards. Then, old master card you lost will not be used.
☞
All existing Master cards needs to be registered again together with new
Master card because all master card registrations were deleted if Owner card
or Clear card is used.
3.2.3 How do I add new Master card?
The procedure to add new Master card is same as 3.2. All master cards that will
be used in locks must be registered to the locks because all Master card registration
are deleted from the locks once lock reads the Owner card.
Alternatively, Time/Master change card can be used. It is recommended to register
new master cards at many lockers. Please refer to the LOS program manual for
Master card registration.
Version 1.2
- 6 - 2010-10-06
