background image

Version 1.2                                   

- 11 -                                                                                  2010-10-06

 

ANNEX B    Trouble Shooting 

 

 

Master  card  registration  in  the  lock 

was failed. 

1) Master card registration should be followed 

after deleting old master card in the lock by 

Owner card. 

2) Put Master card on the lock before waiting 

time is out after Owner card. 

Cannot  open  the  lock  with  Master 

card 

Master  card  is  not  registered  in  the  lock. 

Please Register the Master card in the lock. 

Cannot  open  or  close  the  lock  by 

User card   

1. Check the Setting of User card by LOS. 

(1) Free Selection Mode 

l

  Validity / Operation mode / Lock ID / 

Number of locks this user card can 

be used. 

(2) Fixed Selection Mode 

l

  Validity /Operation Mode / Lock ID / 

Number of locks this user card can 

be used. 

2. Reset the time of the Lock with Time/Master 

card change card. 

3. Old User card may be still in the memory of 

the  lock.  Erase  the  card  information  from 

the  lock  by  Clear  card,  then  register  again 

the Owner card and Master Card, then use 

User card. 

When  “Touch” button  is pressed, five 

beep sounds with Red lamp. 

Low battery sign. Please replace the batteries. 

Latch does not move, while Card and 

lock operates successfully. 

Too  many  goods  may  press  the  lock  body. 

Push  the  locker  door  to  make  the  space  for 

moving of the latch. 

 

 

 

 

 

Summary of Contents for HP500














Reviews: