Version 1.1
- 7 -
lock by Master Card I or Master code.
②
If Master code is set, + Master code + to open any locks.
Master card can be set by Set up Card.
③
Once Master card I is used to open the lock, the lock reverts to default
position
(i.e. lock will stay open for Free Selection, and default code of 1234 for
Assigned mode.).
④
User Card ID will be erased from the lock if Master Card I has the function
to delete the User ID.
⑤
When the lock stops working due to low battery, lock can be opened by
external emergency battery pack.
3.4 Low Battery warning and battery change
The RFID lock uses 4 pieces of 1.5V AA alkaline batteries (6V).
(1) When battery reaches to low voltage ;
①
Beep sounds five times.
②
Red LED lights
③
Low battery is recorded in the memory of the User Card (Operator can know
the low battery of the lock when the card is read at operator
’s Program).
(2) Changing battery
①
Open the battery case at main case.
②
Replace with new batteries.
③
When you replace batteries, do not mix the brands of them and use only brand
new batteries.
④
When you pull out the battery, and if you do not insert the batteries in 3 minute,
the clock of the lock returns to default time.( 1
st
. Jan, 2010 )
⑤
Please use Maintenance card
to set the time of the lock.
(For setting of Maintenance card, please refer to LOS (Locker Operation
System) User Manual or Esmart ultra client user manual.
CAUTION
