Version 1.20
- 6 -
3.2.2 Replacing old Master cards with New Master cards
There are two ways to
delete the lost Master card and register new Master card in
the lock.
(1) Using Time/Master Change Card
Read the master cards (all Master cards to be used in a lock) to
register in each lock at Time/master change menu in LOS program
(or LIS program).
Put the Time/Master change card to the reader, and download the
master card chip numbers to the Card.
Put the Time/Master change card to the locks, then, new Master
cards will be registered to the lock, and lost master card will be
blocked.
(2) Using Owner Card
Delete the old master card registrations in the lock (refer to the 3.1)
with Owner Card.
Put new master cards to each lock so as to register new master
cards. Then, old master card you lost will not be used.
☞
All existing Master cards needs to be registered again together with new
Master card because all master card registrations were deleted if Owner card
or Clear card is used.
3.2.3 Functions of the Master Cards
The function of the Master card can be selected when Master card is issued by :LKS
(Locker Key Management System).
Door Open & User deletion : Turn off the alarms, open the lock and delete old
User card registration in the lock.
Door Open and close : Turn off the alarms and open the lock, and close the
lock. User information in the lock is remained.
3.2.4 Can I set the Master cards to open all locks or specific group of
locks only?
Yes. A Master card is registered in all group of locks, this Master card can open all
locks, and the other Master cards is registered in any specific group of locks only, this
