Version 1.20
- 7 -
Master card can open this specific group of locks only.
Master card registration is made by Setup card when Locker is installed or Master
Card Change card during locker operation (please refer to 3.2 for Master card change).
3.2.5
How do I add new Master card?
The procedure to add new Master card is same as 3.2.1. All master cards that will
be used in locks must be registered to the locks because all Master card registration is
deleted from the locks when Owner card is used.
Alternatively, Time/Master change card can be used. It is recommended to register
new master cards at many locks. Please refer to the LOS program manual for Master
card registration.
3.3 User Card
3.3.1 Free Selection
The initial status of the lock in Free Selection mode is open (Latch is inside).
- Initial Use -
Select the empty locker.
Put your belongings in the locker.
Press
“
Touch
”
button on the front body of the lock to wake up the lock, and
place your card (or any form of user key) to the front body of the lock.
Wait until the Green LED lights and Beep sounds once.
Bolt will move out, and lock is closed.
Close the door, and the lock will be remained at locking state.
- Open the lock -
Press
“
Touch
”
button on the front body of the lock.
Put close your card to the front body of the lock.
Lock will check the lock ID and key of the user card (or any form of user key).
Lock will emit Green LED and beep sound once it is right user card .
Bolt will be moved and locker will open.
User information will be erased from the lock so that new user can use the
empty lock.