Operator's Manual
DS 50 / 0002
8
Cursor "up"
Key for the stepwise increase of the displayed value:
•
when selecting the operation code
•
when selecting the reeving
•
when selecting the geometry data
(
➭
refer to chapter 5.3)
Cursor "down"
Key for the stepwise decrease of the displayed value:
•
when selecting the operation code
•
when selecting the reeving
•
when selecting the geometry data
(
➭
refer to chapter 5.3)
Button “OK”
Key for acknowledgment of an error message.
The correct setting of the operation mode and the reeving is of utmost importance for
the proper function of the system and the crane. Therefore, only operators who are
thoroughly familiar with use and operation of the system shall set the following buttons:
Button " set operating mode"
Button to start the function "set operating mode ".
For the proceeding, please refer to
➭
chapter 5.1.
Button "set reeving"
Button to start the function "set reeving" (parts of
line).
For the proceeding, please refer to
➭
chapter 5.2.
Summary of Contents for DS 50
Page 2: ......
Page 4: ......
Page 8: ...Operator s Manual DS 50 0002 4 Fig 1 Components of the LMI system PAT DS 50...
