Pathfinder Instruments Model TSC-20A
Conductivity Controller with Alarm
OPERATING MANUAL
General Description
The
Model, TSC-20-A
is a microprocessor programmable controller that accepts a conductivity electrode as an input. Outputs are;
one on-off relay;3A mechanical contacts and one Alarm relay, 2A contact. The output can be programmed to operate above or
below the set point; and the alarm is programmed as an absolute value high alarm. The power source is from100 to 240 VAC, 50/
60Hz free voltage there is no need to change connections for different voltages. The controller is programmable from the front
panel via 3 switches, and calibration is done using two front panel adjustments pots. The front panel is a 1/16 DIN, NEMA 4X rated
and mounting hardware is provided.
CRU, RU&CE approvals are standard
Specifications
Measuring Scale Ranges: ………………………….10uS to 75mS
Probe Constant: ……………………………………….K= 0.01, K=0.1, K=1.0, K=1.5, K=2.3, K=10
Accuracy
.......................................................± 2% of span
Output Relay
.................................................S. P. D. T. Relay 3 Amp @ 115VAC, Resistive Load
Alarm Relay..
..................................................S. P. S. T. Relay 2 Amp @ 115VAC, Resistive Load
Power
.............................................................100 to 240 VACS 50/60 Hz @ 3Watts
Operating temperature range
.....................-10 to +50ºC
Storage temperature range
.........................-20 to +60ºC
Display
...........................................................4 Digit red LEDs (Conductivity) 4 Digit green LED's (Set Point)
Dimensions
....................................................48 x 48 x 78.8 mm (1/16 DIN)
Memory
.........................................................Non – volatile
Page1
Installation
A. First Things
Upon receiving your order of
TSC-20-A
controller check to verify that the part number and quantities agree with the enclosed
