Pathway Connectivity
13
QUATTRO Manual
November 2018
Contact Closure Input (CC1)
On the rear panel, there is a 2-pole terminal plug for dry contact closure input.
Currently, as of the publish date of this document, there is no supported feature
making use of this input; however this will be expanded in future firmware updates.
Advanced Configuration
Several gateway and port properties may only be altered using Pathscape
software, available on the Pathway website:
www.pathwayconnect.com
.
Please refer to the Pathscape manual for information on these values and how to
set them.
Firmware upgrades may only be done using Pathscape.
