Patiova varaMORA Assembly Manual Download

Page: 3 / 5

vara

MORA

End Table Assembly Manual

STEP 1

Begin the assembly by placing the table top face

down on a clean and flat surface.

STEP 2

Place the two table sides on either side of the table

top frame. The insert nuts on the side pieces need to

face IN to align with the holes on the frame.

STEP 3

Fasten each side piece to the table top frame using

two (2) 1 1/4" bolts per side through the pre-drilled

holes.

STEP 4

Fasten both side pieces to the table top frame

before moving on to the next step.

Summary of Contents for varaMORA

Page 1: ...ASSEMBLY MANUAL Side Table VARA MORA COM PATIOVA 2023 V1 0 ...

Page 2: ...2 varaMORA End Table Assembly Manual TOOLS INCLUDED Allen Wrench Getting Started END TABLE PARTS HARDWARE Shelf Assembly 1 Table Top Assembly 1 Side Pieces 2 1 1 4 Bolts 8 ...

Page 3: ...two table sides on either side of the table top frame The insert nuts on the side pieces need to face IN to align with the holes on the frame STEP 3 Fasten each side piece to the table top frame using two 2 1 1 4 bolts per side through the pre drilled holes STEP 4 Fasten both side pieces to the table top frame before moving on to the next step ...

Page 4: ...es and align the four holes STEP 6 Fasten the shelf in place using four 4 1 1 4 bolts through the pre drilled holes STEP 7 Fasten both sides of the shelf before moving on to the next step STEP 8 Check the fasteners to ensure that everything is secure then set the side table upright and enjoy ...