Wireless Data Acquisition System Instruction Manual
6
CAUTION
Prohibited
◆
Do not install this product near other electrical appliances. If you install this product near a
facsimile, personal computer, television, microwave oven, or equipment using a motor, this product
may not operate properly.
◆
Do not use this product with the O-ring removed. Waterproofing will be affected, and potentially
cause equipment failure.
◆
Do not use this product in applications that require a high-degree of reliability or real-time
performance. If there are communication problems, this product cannot retrieve accurate data.
◆
Do not use this product near fire, in hot or humid environments, or where corrosive or flammable
gas is present. Failure to follow this instruction could cause a malfunction and the product may not
operate properly.
◆
Do not use or store this product in the following locations. Failure to follow this instruction could
result in a malfunction or product failure.
Environments with poor breathability and ventilation
Near equipment that generate strong electrical or strong magnetic fields
Places exposed to direct sunlight
Locations subject to shock and vibration
Near heating appliances
Environments where there is dust, iron powder, and so on
Places near fire or environments with high temperatures and humidity
Locations where the product may experience a drop
Locations exposed to salty sea air
Mandatory
◆
Operate this product only after thorough testing in the customer environment.
◆
Pay close attention to the polarity of the power supply before connection. Connecting the power
supply incorrectly may cause equipment failure.
◆
To clean this product, wipe with a soft cloth dampened with water. Do not wipe with cleaners
containing thinners, benzene, gasoline, or oil.
◆
Although this product has a high level of security, there is the potential for third-parties to intercept
communications as this product uses radio waves.
◆
When using this product, pay close attention to the following:
Due to the nature of radio waves, communication can be disabled even over insignificant
distances as a result of noise or other environmental factors.
Do not use this product near chemicals. This product could melt or become deformed if any
chemicals adhere to it.
To prevent static electricity, discharge the static electrical charge in your body before starting
work. (You can discharge static electricity by touching your hand on grounded metal objects.)
