Wireless Data Acquisition System Instruction Manual
36
(3)
Setting up the WDT Main Unit
①
Setting up the Main Unit
WDS-WIN01 configuration software is required. Download the software from our website. Install the software
on the computer that will be used to set up and configure the system. (Member registration is required for
downloading from the home page.) For more information about usage and setup, refer to
☞
"WDS-WIN01
Instruction Manual".
②
Setup Items
Setup items are as follows.
Setup item
References
Wireless settings
ExtendedPanID
Refer to
☞
"6.1(2) About Grouping and ExtendedPanID"
Wireless channels
Refer to
☞
"6.1(1) What is the WD Wireless Network?"
Operation settings
Determine signal
tower input
Refer to
☞
Power supply settings
*1
Simple counter settings
Refer to
☞
Selecting the signal wire for a
Transmission mode
Refer to
☞
"8.1(1) Functions Related to Wireless Data
* 1 For this product's settings, use "Power Supply Wire". Refer to
☞
"WDS-WIN01 Instruction Manual".
③
Required Equipment
For information on system configuration when setting up the equipment, refer to
☞
Configuration (using the power supply input kit)
Use the system configuration software WDS-WIN01 for equipment settings.
Install WDS-WIN01 on the maintenance PC and set up the equipment.
For information about using WDS-WIN01, refer to
☞
"WDS-WIN01 Instruction Manual".
The setup procedure is as follows.
Step
Item
References
1
Prepare required equipment and create
maintenance environment
Refer to
☞
Configuration (using the power supply input kit)
2
Communication settings between WDR and
Maintenance PC
Refer to
☞
"WDS-WIN01 Instruction Manual"
3
WDT setup
4
WDR setup
