20
21
Wall mount Signal Tower Instruction Manual
7. Before Use
7. Before Use
This section describes the setup procedure required to use this product. Follow the steps below for setup.
STEP
1
STEP
2
STEP
4
STEP
5
STEP
6
STEP
7
Use this product
"7.2. Setting Up the Password" (
Set Up Network Settings on the
PC
Connect this product to a PC
with a LAN cable
"7.3. Displaying the Web Setup Screen" (
･
Setting Up Product Network Settings
"7.4. Setting Up Product Network Settings" (
･
Select the lighting color and buzzer volume for each tier of Signal
Tower
･
When controlled with PNS Commands
"7.6. Setting Up Command Reception Settings" (
･
When controlled with Modbus/TCP
"7.7. Setting up Modbus/TCP" (
Must be done at the time of purchase or after initializing
the settings. After setup, the login screen will display.
After completing the settings for your purpose, either cycle
the power or reboot before starting operation of the product.
STEP
3
Display the
Web Setup
Screen
Set up this product’s Basic
Settings
Power up this product
Set password
