30
31
Wall mount Signal Tower Instruction Manual
7. Before Use
7.6.
Setting Up Command Reception Settings
Setting for receiving "PNS commands".
Select protocol from "TDP / UDP".
❸
From the Menu, click "Command reception
settings" to enter the "Command reception
settings" screen.
❶
Enter the port number for receiving data.
❷
❹
❷
❸
❶
Click "Confirm" to apply the defined settings.
❹
Item
Description
Default
Value
Input Range
Input
Port number
Enter the port number for receiving data.
10000
10000 to 65535
*
Required
Protocol
Select either "TCP" or "UDP".
TCP
–
Required
* You cannot set the same port number as the Modbus/TCP.
･
TCP: Transmission Control Protocol
･
UDP: User Datagram Protocol
