Patriot Docks 10827 Assembly Instructions Download

Page: 1 / 4

4-Step Ladder

Assembly Instructions

Rubber Mallet

RECOMMENDED TOOLS

Cordless Drill
7/16” Drill Bit

Wrenches or sockets:
M14 (or 13/32”)
M15 (or 5/8”)

Screwdriver
(Phillips)

Work Gloves

PN 10827

*Requires Mounting hole in dock frame be drilled out.

Scan for Online Help:
FAQ, Online support

(651) 674-2450

info@patriotdocks.com

Summary of Contents for 10827

Page 1: ...MENDED TOOLS Cordless Drill 7 16 Drill Bit Wrenches or sockets M14 or 13 32 M15 or 5 8 Screwdriver Phillips Work Gloves PN 10827 Requires Mounting hole in dock frame be drilled out Scan for Online Hel...

Page 2: ...M6x20mm Fasten Step Boards to Step Brackets 16 BB M6x40mm Fastens Step Bracket to Ladder Frame 16 CC M6x50mm Secures Ladder Frame to Shepherd Handle 4 DD M10x60mm Mounting Assembled Ladder to Truss F...

Page 3: ...ning the pre drilled holes and fastening with M6x40mm bolts nuts BB Repeat for second side The Step Boards C will sleeve over the Step Bracket D and are fastened using two M6x20mm bolts nuts AA on eac...

Page 4: ...erd Handle must line up with the open gaps in the 4 x4 deck panel This is so you can run a bolt through and attach the Pinch Plate E Once location is determined place ladder on frame use pre drilled m...