Page 5 of 9
USER GUIDE
Setting for single light through mobile device (Take IOS for example as below.
Android will be slightly different).
1. Search “Dualux BT” at Apple store
or Android Google Play. Download
the “Dualux BT” APP onto the
device.
4.If there is a light in bluetooth
cover range, the new light
will be shown in light list. And
the touch “Light 1”,App will
go to the step 5 interface.
And touch “ ” icon,App
will go to the step 8 interface.
5. Select “Test” in Manual
override and adjust “Detection
Distance” and “Brightness” as
desired. Then press “SAVE”.
Note
: If your settings on the
“Manual override”mode forget
to save, the settings will be
performed for 2 minutes,then
the light will revert to phsical
switch’s control on the lamp.
3. Ensure the power to the light is turned ON. Touch “Search
for Lights” to search for existing lights.Make sure the
bluetooth on your devices is turned on and the the light is
turned on.Otherwise, the searching current light will be no
result.
2. Start the APP. Turn on the
Bluetooth in device settings.
Fig.1
Fig.4
Fig.2
Fig.3
Fig.5
6. Select “AUTO” in Manual override
and adjust “Motion Delay Time”,
“Detection Distance” and
“Brightness” as desired. Then
press “SAVE”.
Note
: If your settings on the
“Manual override”mode forget
to save, the settings will be
performed for 2 minutes,then
the light will revert to phsical
switch’s control on the lamp.
Fig.6
Fig.3-1