61
6. „3 IN 1“
These lawn mowers can be retrofitted for those application purposes:
1. Mulching mower (Only for LM 51 SP / LM 51 SP elstart)
2. Side-discharge mower (Only for LM 51 SP / LM 51 SP elstart)
3. Mower with collecting grass
What is mulching?
When mulching, the grass is cut in one working step, then finely chopped and returned to the grass
strip as natural fertilizer.
Hints for mulch-mowing:
-
Regular cut-back by max.2 cm (from 6 cm to 4 cm grass height).
-
Use a sharp cutting blade and do not mow wet grass.
-
Set max. engine speed.
-
Adapt the pace of work working conditions.
-
Regularly clean mulching wedge, inner side of the deck and mowing blade.
ONE: Retrofitting for mulching mower (Only for LM 51 SP / LM 51 SP elstart)
WARNING: Only with a stopped engine and standstill blade.
1. Raise the rear cover and remove the grass catcher. (Fig.6A)
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the opening
on the deck. (Fig.6B)
3. Lower the rear cover again. (Fig.6C)
Fig. 6A
Fig. 6B
Fig. 6C
Button
