62
TWO: Resetting for side-discharge mowing (Only for LM 51 SP / LM 51 SP elstart)
WARNING: Only with a stopped engine and standstill blade.
1. Lift the rear cover and remove the grass catcher.
2. Mount the mulching wedge. (see above, Fig. 6A, 6B and 6C)
3. Unlock the locking mechanism (Fig. 7A) and lift sideward flap for side discharge. (Fig. 7B)
4. Mount the side discharge channel for side discharge on the support pin of the sideward flap. (Fig.
7C)
5. Lower the sideward flap - the flap must lie down on the side discharge channel (Fig. 7D) and the
side discharge channel must keep in place.
Fig. 7A
Fig. 7B
Fig. 7C
Fig. 7D
THREE: Mowing with the grass catcher
For mowing with the grass catcher, remove the mulching wedge and side discharge channel and
mount the grass catcher.
1. Removing the mulching wedge:
- Lift rear cover and remove the mulching wedge.
2. Removing the side discharge channel for side discharge:
- Lift sideward flap and remove the side discharge channel.
- The sideward flap automatically closes the discharge opening on the housing by mean of spring
force.
- Regularly clean the sideward flap and discharge opening forms of grass rest and stuck dirt.
3. Mount the grass catcher:
- To fit: Raise the rear cover and hitch the grass catcher on rear of mower.
- To remove: Grasp and lift the rear cover, remove grass catcher.
WARNING: Only with a stopped engine and standstill blade.
Locking mechanism
