10
Mount Assembly- Motorized
1. Set King Post to foundation as instructed on previous page.
2. Assemble the azimuth actuator to the main post and A-frame locking it into a steady position so
the Hub assembly can be safely placed.
3. With 2 helpers place the hub assembly in the zenith (bird bath) position on top of the King Post
A-frame as shown using the preassembled hardware in place on the A-frame. (Note the position of the
Elevation detail!)
4. Assemble the elevation actuator as shown, and adjust it to position the Hub assembly in the up-
ward “bird bath” position.
Elevation
Actuator
muffler
bracket
U-Bolt
Bushing
