background image

3

.                                                                                                                                                                            
1.  Perform as many functions as possible on the ground.

2. Watch out for overhead power lines. Check the distance to the power lines before starting installation.  
     We recommend you stay a minimum of 6 meters (20 feet) from all power lines.

3.  Do not use metal ladders.

4. Do not install antenna or mast assembly on  a windy day.

5.  If you start to drop antenna or mast assembly, get away from it and let if fall.

6.  If any part of the antenna or mast assembly comes in contact with a power line, call your 
          local  power  company.  DO  NOT  TRY  TO  REMOVE  IT  YOURSELF!  They  will  remove  it  safely.                                                     
 
7.  Make sure that the mast assembly is properly grounded.
                                                                                                                                                                        
                                                                                                                                                                        
                                                                         

 

WARNING

Assembling dish antennas on windy days can be dangerous. Because of the antenna surface, even slight 
winds create strong forces. For example, a 1.0m antenna facing a wind of 32 km/h (20 mph) can undergo 
forces of 269 N (60 lbs.). Be prepared to safely handle these forces at unexpected moments. Do not at-
tempt to assemble, move or mount dish on windy days or serious, even fatal accidents may occur. PA-
TRIOT ANTENNA SYSTEMS is not responsible or liable for damage or injury resulting from antenna 
installations.

                                                                            

WARNING 

                                                               

Antennas improperly installed or installed to an inadequate structure are very susceptible to wind damage. 
This damage can be very serious or even life threatening. The owner and installer assumes full responsibil-
ity that the installation is structurally sound to support all loads (weight, wind & ice) and properly sealed 
against leaks. PATRIOT ANTENNA SYSTEMS  will not accept liability for any damage caused by a 
satellite system due to the many unknown variable applications.

INSTALLATION OF THIS PRODUCT SHOULD BE PERFORMED ONLY BY A PROFESSIONAL 
INSTALLER AND IS NOT RECOMMENDED FOR CONSUMER D.I.Y. (DO-IT-YOURSELF)        
INSTALLATIONS.                       

IMPORTANT!!!

                                                    WATCH FOR WIRES!                                            
  Installation  of  this  product  near  power  lines  is  dangerous.  For  your  own  safety,                             
follow these important safety rules.

Summary of Contents for Patriot 3.8m Commercial Antenna King Post...

















Reviews: