ELECTIRC GRIDDLE MANUAL
griddle above it and may be set at different temperatures.
COOKING
Set the thermostat dial knob at the temperature desired. After a short pre-heating period, the thermostat will
automatically maintain the selected temperature.
HEATING LIGHT
Each thermostat has its own HEATING light which indicates when that section's control knob is active and that section of
the unit is not in the off position.
CLEANING CARE
·
DO NOT
use any abrasive or flammable cleaning fluids.
·
DO NOT
hose down, immerse or pressure wash any part of the Griddle, excluding the catch tray.
·
NEVER
use a scrubber pad (on all exterior surfaces, except the griddle plate), steel wool or abrasive material, or cleaners containing
chlorine, iodine and ammonia or bromine chemicals as these will deteriorate the stainless steel and shorten the life of the unit.
Contact a service representative or a local service company for service or required maintenance.
PATRIOT GRIDDLE SURFACE LIMITED WARRANTY EXCLUSIONS
Your PATRIOT griddle has been designed to give you many years of cooking reliability and
requires minimum maintenance to keep the surface in its original condition. All griddle surfaces are warranted for
a period of 1 year against manufacturing defects to the original owner from the date of installation. This limited
warranty is void if it is determined by PATRIOT or one of its authorized representatives that the surface has been
misused or abused or subjected to the following situations:
1. Unit was improperly installed.
2. Incorrect voltage applied to electric units allowing the surface to overheat and discolor.
3. The misuse of any instrument or tool which scratches or makes indentations in the surface which could cause
the surface to peel, flake, or chip off.
4. The use of any chemical or abrasive cleaning solution, stone, screen or other cleaning products which could
damage and affect the performance of the surface.
5. The neglect of daily routine maintenance to the surface.
THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL
This unit has been tested for before leaving the factory.
Damage may have possibly occurred in shipping. If damage is present, immediately contact the shipping company
that delivered the unit and file a claim for shipping damage. If you do not file promptly, the warranty may not be
covered.
ELECTRICAL PARAMETER
MAINTENANCE AND REPAIR
