EN
11
CAUTION
Make sure the ON
/
OFF switch is set to position “OFF
/0” and insert the plug into a properly
installed socket.
MANIPULATION WITH LANCE WITH NOZZLE
ATTENTION
•
The washer must be used on a secure and stable surface in a standing, upright position
(Fig. 2).
•
Connect the product to power and water supply as described.
•
Open the water supply.
•
Hold the spray gun with both hands.
•
Direct the nozzle of the chosen accessory away from you towards the surface to be
cleaned.
•
Unlock the trigger and press it until a constant amount of water flows through the
nozzle, to allow air trapped in the hose to escape.
•
Release the trigger.
•
Turn on the switch “OFF/ON”.
•
Hold the spray gun with both hands. Direct the water jet to the object to be cleaned and
press the trigger.
Release the lever of the trigger gun; the device will switch off again and stop the water jet.
High pressure remains in the system.
WARNING! Beware of kickback when pressing the trigger!
indicate the water shape adjustment
rotate to left or right to adjust water shape
(fan-
shape or straight
line)
here showed pressure
+/
-
"+" mean the HIGH
PRESSURE mode
"-" mean the LOW PRESSURE mode
when
you need use the detergent, pls rotate to "
-" position
,
then the detergent will come out
