EN
7
•
WARNING!
If an extension cord is used, the plug and socket must be of watertight
construction.
•
Only use suitable extension cable when working outdoors. Extension cable must have a
minimum cross-
section of 1.0 mm
2
.
•
WARNING!
This device was developed to be used with cleaning agents supplied or
recommended by the Manufacturer. The use of any other cleaning agents or chemicals
can negatively affect the safety of the device.
•
WARNING!
Risk of explosion -
Do not spray flammable liquids.
•
WARNING!
Water that has flown through backflow preventers is considered to be non
-
potable.
•
Cable connections should be kept dry and off the ground. Always uncoil the extension
cable completely to avoid heat damage to the cable.
•
WARNING!
Do not use t
he device when other persons or animals are in the near vicinity
unless they are wearing appropriate protective clothing.
•
WARNING!
High pressure jets can be dangerous when the cleaner is not used properly.
Do not direct the jet toward persons, animals, liv
e electrical equipment or the device
itself.
•
WARNING!
Do not direct the jet against yourself or others in order to clean clothes or
foot-
wear.
•
WARNING!
High pressure cleaners shall not be used by children or untrained personnel.
•
WARNING!
High pressure hoses, fittings and couplings are important components for
the safety of the device. Only use high pressure hoses, fittings and couplings that are
recommended by the Manufacturer.
•
WARNING!
To ensure machine safety, use only original spare parts from the
Manufa
cturer or approved by the Manufacturer.
•
WARNING!
Do not use the machine if a supply cord or important parts are damaged,
e.g. safety devices, high pressure hoses, trigger gun.
•
Do not pull or carry the electric tool by its mains cable. Protect the mains cab
le from
becoming damaged by oil, solvents and sharp edges.
•
Keep your place of work tidy.
•
Ensure that the switch is turned off when connecting the unit to the power supply.
•
Wear the suitable work clothes.
•
Check your high pressure cleaner to ensure that it is in good working order. If the
cleaner is not functioning properly, have it checked by an authorized professional. Have
all maintenance and inspection work carried out only by a qualified electrician.
•
The water jet that emerges from the high pressure nozzle produces a ‘kickback’ on the
spray handle. Therefore, make sure that you have a solid footing and that you have a
firm hold of the handle grip. In order to protect yourself from possible flying objects
(that are released due to the high pressure).
•
The high pressure jet can damage vehicle tires and tire parts. Keep a distance of at least
30 cm from the object being cleaned.
•
If there is a power failure while you are using the machine, be sure to switch off the
machine for safety reasons.
•
The e
lectric pump always must be able to draw on a sufficient supply of water. Dry
operation causes severe damage to the seals.
•
Disconnect from the power supply before carrying out user maintenance.
•
Only use original spare parts from the Manufacturer or approved by the Manufacturer.
