•
Hold the other
grinding
wheel by hand, and
remove the nut
(
19
)
and outer flange
(20)
.
Please note
that the left side
grinding wheel
locking nut has a left
-
handed
thread.
•
Slide off the used grinding
wheel (21) and replace
with a new one.
O
nly
use
grinding wheels specified
above.
Inspect the
new
wheel for cracks, chips or any other visible damage
. V
ibrating
,
unbalanced
or
damaged
wheels may not be used and should be discarded.
•
Replace the outer flange
(
20
)
.
Make sure both wheel flanges
are placed with the concave
sides
towards the wheel.
•
Replace the nut
(
19
)
securely. Do not overtighten as this may
damage the grinding wheel.
•
Re
-
assemble the wheel cover
(
17
)
fully
. A
fter mounting
new grinding
wheel test it by running it idle
for about one minute.
31
Summary of Contents for SB0250
Page 2: ...2...