STEP 4 - INSTALL FAN ASSEMBLY SAFETY CABLE
Note: This step is required. Failure to install the safety
cable may void the manufacturer’s warranty.
1)
Pass one end of the safety cable under the hangers. Refer to Images
9 and 10 for more information.
2)
The opposite end of the safety cable should be passed over the top
of the I-beam or other mounting structure. Connect the two ends of
the cable together by means of three saddle clamps (provided) in the
manner shown in Image 11.
3)
Tighten the saddle clamps securely using a ½” socket. Torque to 15
ft-lbs
pattersonfan.com
800.768.3985
11
IMAGE 10
IMAGE 11
