ST#4
Instruction Booklet
Cleaning Your Scooter
：
If your scooter is dirty, use a damp or lightly soapy cloth to wipe it down. Do not use
running water to wash or rinse scooter in order to protect electrical parts. Polish with
an automotive liquid polish.
Maintaining Your Scooter
：
All maintenance and repair of scooter should be done by an authorized dealer.
The following areas required periodic inspection:
•
Tyre pressure (Tyre pressure = 2.8 bar / 280 kilopascals)
•
All electrical connections are firmly attached
Please Contact your approved Patterson Medical Dealer for further information
regarding Servicing of the scooter, as it is recommended that only authorized
Paterson Medical Dealer carry out this work.
Please contact your Patterson Medical dealer as it is recommended that only
authorized Patterson dealer carry out any such work.
•
Open-ended spanner, 12 mm
•
Open spanner, 17 mm.
•
Rubber hammer
Storing Your Scooter
：
Between uses, your scooter is best stored in a dry location.
Remark :
Obstacle height approx. 5cm (Figure.19)
Feasible groove width approx. 17cm, scooter must go straight line to across the groove. (Figure.20)
Requirements for end user service tools required
12
CARE AND MAINTENANCE
Figure 19
Figure 19
Figure 20
Figure 20
