![background image](http://html1.mh-extra.com/html/pattfield-ergo-tools/3420652/3420652_manual_762933121.webp)
EN
121
Troubleshooting
Problem
Possible cause
Solution
Motor does not
start
Internal terminals disconnected By customer service workshop
Safety Lock-off defective
By customer service workshop
Scarifier housing clogged
Change the scarifying depth if neces-
sary; clean the housing so that the
spike drum can move freely
Safety plug is not connected
Connect safety plug
Battery is not correctly inserted Remove battery and insert again
Engine perfor-
mance drops
Soil is too firm
Change working depth
Housing clogged
Clean housing
Roller badly worn
Replace roller
Imprecise
scarifying result
roller worn
Replace roller
Wrong working depth
Correct working depth
Motor is run-
ning, roller is
not roating
Toothed belt is torn
By customer service workshop
Caution!
Make sure the appliance is switched off and the batteries are removed. Al-
ways wear protective gloves.
Summary of Contents for 3420652
