EN
86
Using the tool
1.
Press switch
7
to ON position (I).
2.
Dry grinding: Use the grinding wheel
3
or
the grinding wheel
10
. Put the work piece
on the work rest
9
and hold it to the rotat-
ing wheel.
3.
To switch off the tool, press switch
7
to
OFF position (0).
Warning!
After switching OFF, the
wheels continue to rotate for some
time.
INTENDED USE
The tool is intended for dry grinding only.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
Product overview
1
Eye shield (2x)
2
Wheel guard (2x)
3
Grinding wheel coarse-grain
4
Wheel guard securing bolts (6x)
5
Power plug
6
Mounting holes (one at each corner)
7
ON/OFF switch
8
Work rest screws
9
Work rest
10
Grinding wheel fine-grain
BEFORE USE
Secure the grinder through the mount-
ing holes
6
to a bench with suitable
screws, nuts or bolts (not included).
Mount the mounting brackets to the
grinding wheel guards
2
.
Attach the work rest
9
with its screws.
Adjust the gap between workpiece
support and grinding wheel
3
or
10
to 2 mm. Ensure that the work rest
9
is not tilted upwards and tighten the
work rest screws
8
.
Fit the eye shields
1
to the mounting
brackets with a gap of 2 mm to the
grinding wheel
3
or
10
without com-
ing into contact with it.
1
2
3
3
Summary of Contents for 4306517115760
