EN
102
MOUNTING THE DEVICE
Push the rear and front tube together
and secure with two long screws. Push
wheel support on the front tube and se-
cure with a short screw.
1
Mount additional handle. Select postion
by loosening star screw. Tighten star
screw to fix position..
3
Push handle on body until it clicks
into place and secure with two short
screws
Open the knurled screw, feed the belt
strap through the opening and close
the knurled screw again.
2
4
Caution!
Make sure there are no
batteries in the battery slot.
Intended use
This garden tool is intended exclusively to
handle foliage and garden refuse such as
grass and small branches according to the de-
scriptions and safety instructions indicated in
this operating manual. The tool is not intended
for commercial use.
Any use not compliant to the description in this
manual or any modification to the tool is con-
sidered as improper use and could cause con-
siderable dangers. The manufacturer is not
liable for any type of damage resulting from
this: the user bears the sole risk.
Product overview
1
Additional handle
2
Star screw
3
Body
4
Rear suction tube
5
Front suction tube
6
Wheel support
7
Castors
8
Catch bag
9
Catch bag socket
10
Selector switch
11
Insertion slot for battery
12
Speed control
13
On/Off switch
14
Handle
