EN
144
EN
145
Disposal
The crossed-out wheeled bin symbol
requires separate disposal for waste
electrical and electronic equipment
(WEEE). Such equipment may contain
valuable, but dangerous and hazardous
substances. You are required by law to return
these products to a designated collection point
for the recycling of WEEE and must not under
any circumstances dispose of them as
unsorted municipal waste. In this way, you can
help to conserve resources and protect the
environment.
In Germany, HORNBACH is obliged:
- to take back old appliances of the same type
free of charge in HORNBACH stores when
you purchase a new electrical or electronic
appliance.
- to take back up to 3 WEEE of the same
type (up to max. 25 cm edge length) free of
charge in HORNBACH stores, even if you do
not purchase a new appliance.
- when delivering a new electrical or
electronic appliance to a private household,
to collect an old appliance of the same type
free of charge or to enable you to return it in
your immediate vicinity.
For further details, please consult
www.hornbach.com or your local authorities.
Children must not play with plastic bags and
packaging material, due to the risk of injury
and suffocation. Store such material safely
or dispose of it in an environmentally friendly
way.
Technical Data
Pattfield Compressor 6l
Model
PE-1506 PE-1506CH
Version
EU plug
Swiss plug
Model No.
10090394 10090395
Nominal voltage
220 V – 240 V AC, 50 Hz
Rated power *)
1200 W S3 25% *)
Protection class
I
Degree of protection
IP30
Max. speed of motor
3800 rpm
Suction capacity
172 l/min
Tank capacity
6 l
Max. operating pressure
8 bar
Ambient temperature
+5 °C to +40 °C
Sound pressure level (L
pA
)
82.1 dB(A)
Uncertainty K
3 dB(A)
Sound power level (L
WA
)
95.1 dB(A)
Uncertainty K
1.99 dB(A)
Guaranteed sound power level (L
WA
)
97 dB(A)
Weight
9 kg
Dimensions (L x W x H)
395 mm x 370 mm x 340 mm
Max. setup inclination
10°
*) S3 25% indicates an intermittent operation (25% load run out of the entire runtime).
Noise
Wear hearing protection for protection of your
ears.
The declared noise emission values have been
measured in accordance with a standard test
method (EN 3744:1995) and may be used for
comparing one tool with another. The declared
value may also be used in a preliminary as-
sessment of exposure.
Warning!
The noise emission during
actual use of the power tool can differ
from the declared total value depending on
the ways in which the tool is used, in particu-
lar, what kind of work piece is machined.
