VI- MAINTENANCE AND REPAIRS
1
STORAGE
1) Store the petrol brush cutter and its
accessories in a dark, dry, frost-free,
well-ventilated place.
2) Always store the petrol brush cutter and
grass trimmer in a place that is
inaccessible to children. The ideal storage
temperature is between 10 and 30°C. For
best results, cover the petrol brush cutter
and grass trimmer with a proper cloth or
foil to protect it against dust.
3) If you are not going to use the petrol
brush cutter and grass trimmer for an
extended period of time (more than 3
months) and before storing it for the winter,
empty the fuel tank.
2
GENERAL CLEANING
1) Regular and proper cleaning will not
only ensure safe use but also prolongs
the life time of this petrol brush cutter and
grass trimmer.
2) Switch the petrol brush cutter off, let it
cool down and unplug the spark plug
connector.
3) Clean the petrol brush cutter with a
damp cloth and neutral soap. Use a brush
for areas that are hard to reach.
4) In particular clean ventilation openings
and the cutting means after every use with
a cloth and brush.
5) Remove stubborn dust with high
pressure air (max. 3 bar).
6) Check for any damage and worn. Repair
damages according to this instruction
manual or bring it to an authorised service
centre before using the petrol brush cutter
and grass trimmer again.
3
CUTTING MEANS AND GUARDS
WARNING! Wear safety gloves
when working on the cutting means and
around it! Use proper tools to remove
debris, e. g. a wooden stick! Never use
your bare hands!
1) Keep the cutting means and guards
clean and free of debris. Remove grass
clippings.
2) Keep the blade sharp to ensure a good
cutting performance.
3) Replace a worn or damaged cutting
means with new ones of the same type.
4
AIR FILTER
1) Inspect the air filter regularly. Clean it at
least every 25 hours or replace with a new
one if necessary.
2) Open the air filter case. Tap the filter on
a stable surface to remove dust. Use high
pressure air (max. 3 bar) to remove
stubborn dust.(Fig.23)
3) Apply a small amount of air filter oil on
the filter to increase the filter performance.
Wring out surplus oil and put the filter into
the case.
4) Close the air filter case.
5
FUEL
1) Empty the fuel tank when storing the
petrol brush cutter over 30 days to avoid
deterioration of the fuel.
2) Open the tank by unscrewing the tank
cap and use a proper fuel pump to empty
the tank.
Summary of Contents for 8302769
