EN
86
Using the tool
1.
To switch on the tool, press and hold the
on / off switch
5
.
2.
Make sure your workpiece can not slip.
Start working, while holding the tool firm-
ly with both hands.
3.
To switch off the tool, release the on / off
switch
5
.
Product overview
1
Top hammer-drill / hammer switch
2
Locking sleeve
3
Chuck
4
Auxiliary handle
5
On / Off switch
6
Rear hammer-drill / drill switch
7
Power cord
APPLY HANDLE
Release the noose of the auxiliary han-
dle
4
and slide it onto the rotary ham-
mer.
1
Set the desired angle and tighten the
auxiliary handle
4
securely.
2
Caution!
Make sure the tool is
switched off and unplugged.
Intended Use
The tool is intended for hammer drilling in con-
crete, brick and stone. It can be set to rotation
only for drilling in metal and wood and also for
hammer funcion only for chiseling brick, con-
crete and masonry products. The tool is not
intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
Summary of Contents for PA-1200BH
