EN
87
Caution!
Only set operation modes
while the aplliance is switched off.
FIT CHISEL OR DRILL
Slide back the locking sleeve
2
.
1
Fit the SDS-plus chisel or drill into the
chuck
3
.
2
Make sure that the chisel or drill is fully
inserted.
3
Set the rear hammer-drill / drill switch
6
to hammer-drill .
2
Relase the locking sleeve
2
and check
if the chisel or drill is securely fixed.
To remove the chisel or drill, slide back
the locking sleeve
2
and pull out the
chisel or drill.
4
HAMMER FUNCTION
Set the top hammer-drill / hammer
switch
1
to hammer .
1
HAMMER-DRILL FUNCTION
Set the top hammer-drill / hammer
switch
1
to hammer-drill .
1
Set the rear hammer-drill / drill switch
6
to hammer-drill .
2
Caution!
Make sure the tool is
switched off and unplugged and
wear protective gloves.
DRILL FUNCTION
Set the top hammer-drill / hammer
switch
1
to hammer-drill .
1
Set the rear hammer-drill / drill switch
6
to drill .
2
Caution!
Only set operation modes
while the aplliance is switched off.
Caution!
Only set operation modes
while the aplliance is switched off.
Summary of Contents for PA-1200BH
