EN
102
EN
103
g)
Secure the workpiece.
A workpiece
clamped with clamping devices or in a vice
is held more secure than by hand.
h)
Do not touch and/or inhale harmful/
toxic dust generated during sanding. All
persons in the vicinity of the work area
must wear appropriate personal protec-
tive equipment for protection against
harmful/toxic dusts.
Use the dust extrac-
tion facility and keep the work area well
ventilated.
i) Ensure that you have removed foreign ob-
jects such as nails and screws from the
workpiece before commencing sanding.
j)
Do not force sander, let the tool do the
work at a reasonable speed.
Overloading
will occur if too much pressure is applied
and the motor slows resulting in inefficient
sanding and possible damage to the sander
motor.
k)
Don’t continue to use worn, torn or heav-
ily clogged sanding belts.
l)
Don’t touch the moving sanding belt.
Declaration of conformity
We declare, that the product described
in
Technical Data
:
920 W
Belt Sander PBS900G
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
RoHS Directive 2011/65/EU
EMC Directive 2014/30/EU
and in accordance to the following applicable
harmonized standards:
EN 62841-1:2015
EN 62841-2-4:2014
EN 55014-1:2006+A2
EN 55014-1:2017
EN 55014-2:1997+A2
EN 55014-2:2015
EN 61000-3-2:2014
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1
Andreas Back
Head of Quality Management, environment &
CSR
Person authorised to compile the technical file
Bornheim, 01.12.2020
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
Dust bag
Use of the dust bag can reduce dust-related
hazards.
Make sure the dust bag is not full or clogged.
To clean the dust bag, remove it from the dust
port
9
. Open the zipper and carefully shake
the dust bag with the opening pointing down-
wards to remove the sanding dust.
Care & Maintenance
Caution!
Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean. Use
a soft brush to remove any accumulated
dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
Caution!
If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or similarly
qualified person in order to avoid hazard.
Summary of Contents for PBS900G
Page 56: ...EN 110 EN 111...
