EN
104
EN
105
Product overview
1
On/off switch
2
Sanding pad
3
Dust port
4
Speed dial
5
Power cord
DUST COLLECTION
To prevent personal injuries, make sure
to connect a suitable vacuum cleaner
to the dust port
3
.
Never use the tool without a dust
collection system.
1
Using the tool
1.
Place the tool on the workpiece so that
the complete sanding paper is in contact.
Make sure your workpiece can not slip.
2.
To switch on the tool, switch on the on/off
switch
1
. Start working, while holding the
tool firmly with both hands.
3.
Move the tool slowly over the workpiece in
parallel lines, circles or crosswise move-
ments and successive passes.
4.
To switch off the tool, switch off the on/off
switch
1
.
Warning!
Only switch the tool on
when the sanding paper is in full
contact with the workpiece.
Intended use
The tool is intended for dry sanding of wood,
plastic, metal and coated surfaces. It is not
suitable for plaster or drywall filler. The tool is
not intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
1
3
Lieferumfang
Etendue de livraison
Materiale compreso nella fornitura
Leveringsomvang
Leveransomfång
Rozsah dodávky
Rozsah dodávky
Volumul livrat
Scope of delivery
DE
SV
IT
SK
FR
CZ
NL
RO
GB
1x
1x
2
4
5
1